Fertilising Products Regulation

02019R1009-20221003 → 02019R1009-20230316

ANNEX I Product Function Categories (PFCs) of EU fertilising products PART I DESIGNATION OF PFCS 1. Fertiliser A. Organic fertiliser I. Solid organic fertiliser II. Liquid organic fertiliser B. Organo-mineral fertiliser I. Solid organo-mineral fertiliser II. Liquid organo-mineral fertiliser C. Inorganic fertiliser I. Inorganic macronutrient fertiliser (a) Solid inorganic macronutrient fertiliser (i) Straight solid … 2,448 unchanged words … be at least the following: (a) 10 % by mass of total nitrogen (N), (b) 12 % by mass of total phosphorus pentoxide (P2O5), (c) 6 % by mass of total potassium oxide (K2O), (d) 5 % by mass of total magnesium oxide (MgO), (e) 12 9 % by mass of total calcium oxide (CaO), (f) 10 % by mass of total sulphur trioxide (SO3), or (g) 1 % by mass of total sodium oxide (Na2O). However, the total sodium oxide (Na2O) content shall not exceed 40 % by mass. Where … 2,108 unchanged words … lignite, but no other material which is fossilized or embedded in geological formations. 2. Contaminants in an organic soil improver must not exceed the following limit values: (a) cadmium (Cd) 2 mg/kg dry matter, (b) hexavalent chromium (Cr VI) 2 mg/kg dry matter, (c) mercury (Hg) 1 mg/kg dry matter, (d) nickel (Ni): (Ni) 50 mg/kg dry matter, (e) lead (Pb) 120 mg/kg dry matter, and (f) inorganic arsenic (As) 40 mg/kg dry matter. 3. The copper (Cu) content in an organic soil improver must not exceed 300 mg/kg dry matter, and the zinc (Zn) content in an organic soil improver … 1,641 unchanged words … declaration of conformity); (b) point (a) of Article 7(2) (authorised representatives’ obligation to keep the EU declaration of conformity); (c) Article 8(8) (importers’ obligation to keep a copy of the EU declaration of conformity at the disposal of the market surveillance authorities).

02019R1009-20221003 → 02019R1009-20230316

ANNEX II Component Material Categories (CMCs) An EU fertilising product shall consist solely of component materials complying with the requirements for one or more of the CMCs listed in this Annex. The component materials, and the input materials used to produce them, shall … 5,143 unchanged words … of Directive 2008/98/EC, (f) thermal oxidation materials or derivates, which are recovered from waste or are by-products within the meaning of Directive 2008/98/EC, or (g) pyrolysis and gasification materials, which are recovered from waste or are by-products within the meaning of Directive 2008/98/EC, 2008/98/EC , or (h) ammonium salts, sulphate salts, phosphate salts, elemental sulphur, calcium carbonate or calcium oxide, which are recovered from waste within the meaning of Article 3, point 1, of Directive 2008/98/EC. 2. The by-products shall comply with the requirement set out in … 5,023 unchanged words … product only if they have been manufactured maximum 36 months before signing the EU declaration of conformity for the respective EU fertilising product. (10) The high purity material shall comply with the requirement set out in point 2 in CMC 1.

02019R1009-20221003 → 02019R1009-20230316

ANNEX IV Conformity assessment procedures PART I APPLICABILITY OF CONFORMITY ASSESSMENT PROCEDURES This Part sets out the applicability of conformity assessment procedure modules, as specified in Part II of this Annex, to EU fertilising products depending on their CMCs as specified in Annex II, … 323 unchanged words … product composed solely of one or more of the following component materials: (a) nitrification, denitrification or urease inhibiting compound as specified in CMC 1 in Part II of Annex II, (b) plants, plant parts or plant extracts as specified in CMC 2 in Part II of Annex II, (ba) micro-organisms as specified in CMC 7 in Part II of Annex II, (c) polymers other than nutrient polymers as specified in CMC 9 in Part II of Annex II, (d) derived products within the meaning of Regulation (EC) No 1069/2009 as specified in CMC 10 in Part II … 9,008 unchanged words … materials and their storage place, (ii) analyse the reasons of the non-conformity and take any necessary action to avoid its repetition, (iii) record in the quality records referred to in point 5.1.4 if reprocessing takes place, or if the output material is eliminated, eliminated , (iv) for materials belonging to CMCs 12, 13, 14 and 15, measure retainer samples referred to in sub-point (fb) and take the necessary corrective actions to prevent possible further transport and use of that material. 5.1.4. The quality system shall cover … 1,413 unchanged words … manufacturer’s obligations set out in points 3, 5.2, 5.5.1, 7 and 8 may be fulfilled by his or her authorised representative, on his or her behalf and under his or her responsibility, provided that they are specified in the mandate.