Waste Shipments Regulation

32024R1157 → 02024R1157-20250109

ANNEX III LIST OF WASTES SUBJECT TO THE GENERAL INFORMATION REQUIREMENTS LAID DOWN IN ARTICLE 18 (GREEN LISTED WASTE) AS REFERRED TO IN ARTICLE 4(4)(a) Regardless of whether or not wastes are included on this list, they may not be subject to … 548 unchanged words … II: Metal-bearing wastes arising from melting, smelting and refining of metals GB040 7112 262030 262091 Slags from precious metals and copper processing for further refining Other wastes containing metals The term properly emptied is understood as presuming full compliance with international rules and guidelines on ship recycling. recycling.Entry GC010 shall apply only for waste shipped within the Union and only until 31 December 2026.Entry GC020 shall apply only for waste shipped within the Union and only until 31 December 2026. GC010 Electrical assemblies consisting only of metals or alloys GC020 Electronic scrap (e.g. printed circuit boards, electronic components, wire, etc.) and reclaimed electronic components suitable for base and precious metal recovery GC030 ex890800 Vessels and other floating structures for breaking up, properly emptied of any cargo and other materials arising from the operation of the vessel which may have been classified as a dangerous substance or waste GC050 Spent Fluid Catalytic Cracking (FCC) Catalysts (e.g.: aluminium oxide, zeolites) Glass waste in non-dispersible form GE020 ex7001 ex701939 Glass Fibre Waste Ceramic wastes in non-dispersible form GF010 Ceramic wastes which have been fired after shaping, including ceramic vessels (before and/or after use) Other wastes containing principally inorganic constituents, which may contain metals and organic materials GG030 ex2621 Bottom ash and slag tap from coal fired power plants GG040 ex2621 Coal fired power plants fly ash Wastes arising from tanning and fellmongery operations and leather use GN010 ex050200 Waste of pigs’, hogs’ or boars’ bristles and hair or of badger hair and other brush-making hair GN020 ex050300 Horsehair waste, whether or not put up as a layer with or without supporting material GN030 ex050590 Waste of skins and other parts of birds, with their feathers or down, of feathers and parts of feathers (whether or not with trimmed edges) and down, not further worked than cleaned, disinfected or treated for preservation

32024R1157 → 02024R1157-20250109

ANNEX IV LIST OF WASTES SUBJECT TO THE PROCEDURE OF PRIOR WRITTEN NOTIFICATION AND CONSENT (AMBER LISTED WASTE)This list originates from the OECD Decision, Appendix 4. AS REFERRED TO IN ARTICLE 4(2)(a) Part I Wastes listed in Annexes II and VIII to the Basel ConventionAnnex VIII to the Basel Convention is listed in this Regulation in Annex V, Part 1, List A. Annex II to the Basel Convention is listed in Annex V, Part 2, List A.. For the purposes of this Regulation: (a) Any reference in Annex VIII to the Basel Convention to list B shall be understood as a reference to Annex III to this Regulation. (b) In Basel entry A1010, the term excluding such wastes specifically listed on List B (Annex IX) is a reference both to Basel entry B1020 and the note on B1020 in Annex III to this Regulation, Part I(b). (c) Basel entries A1180 and entry A2060 do shall not apply and OECD entries GC010, GC020 and entry GG040 in Annex III, Part II shall apply instead when appropriate. (d) Basel entry A4050 includes spent potlinings from aluminium smelting because they contain Y33 inorganic cyanides. If the cyanides have been destroyed, spent potlinings are assigned to Part II entry AB120 because they contain Y32, inorganic fluorine compounds excluding calcium fluoride. (e) Basel entry A3210 does not apply and entry AC300 in Part II applies instead. (f) For waste shipped within the Union, Basel entry Y48 does not apply and the following entry applies instead: EU48 Plastic waste not covered by entry AC300 in Part II or by entry EU3011 in Part I of Annex III, as well as mixtures of plastic waste not covered by point 4 of Annex IIIA. (g) For waste shipped within the Union until 31 December 2026, Basel entry Y49 shall not apply and entries GC010 and GC020 in Annex III Part II shall apply instead where appropriate. Part II: Metal-bearing wastes This listing includes wastes in the form of ash, residue, slag, dross, skimming, scaling, dust, powder, sludge and cake, unless a material is expressly listed elsewhere. AA010 261900 Dross, scalings and other wastes from the manufacture of iron and steel AA060 262050 Vanadium ashes and residues AA190 810420 ex810430 Magnesium waste and scrap that is flammable, pyrophoric or emits, upon contact with water, flammable gases in dangerous quantities Wastes containing principally inorganic constituents, which may contain metals and organic materials AB030 Wastes from non-cyanide based systems which arise from surface treatment of metals AB070 Sands used in foundry operations AB120 ex281290 ex3824 Inorganic halide compounds, not elsewhere specified or included AB130 Used blasting grit AB150 ex382490 Unrefined calcium sulphite and calcium sulphate from flue gas desulphurisation (FGD) Wastes containing principally organic constituents, which may contain metals and inorganic materials AC060 ex381900 Hydraulic fluids AC070 ex381900 Brake fluids AC080 ex382000 Antifreeze fluids AC150 Chlorofluorocarbons AC160 Halons AC170 ex440310 Treated cork and wood wastes AC250 Surface active agents (surfactants) AC260 ex3101 Liquid pig manure; faeces AC270 Sewage sludge AC300 Plastic waste, including mixtures of such wastes, containing or contaminated with Annex I constituents, to an extent that it exhibits an Annex III characteristic (note the related entry EU3011 in Part I of Annex III, and the related entry EU48 in Part I) Wastes which may contain either inorganic or organic constituents AD090 ex382490 Wastes from production, formulation and use of reprographic and photographic chemicals and materials not elsewhere specified or included AD100 Wastes from non-cyanide based systems which arise from surface treatment of plastics AD120 ex391400 ex3915 Ion exchange resins AD150 Naturally occurring organic material used as a filter medium (such as bio-filters) Wastes containing principally inorganic constituents, which may contain metals and organic materials RB020 ex6815 Ceramic based fibres of physico-chemical characteristics similar to those of asbestos

32024R1157 → 02024R1157-20250109

ANNEX V WASTE LISTS FOR THE PURPOSE OF ARTICLE 39 Introductory notes 1. This Annex applies without prejudice to Directive 2008/98/EC. 2. This Annex consists of two parts. Article 39 further refers to the list of waste as referred to in Article 7 of … 427 unchanged words … on list B (B1160) does not specify exceptions. A1160 Waste lead-acid batteries, whole or crushed A1170 Unsorted waste batteries excluding mixtures of only list B batteries. Waste batteries not specified on list B containing Annex I constituents to an extent to render them hazardous. A1180 A1181 Electrical and electronic waste (note the related entry Y49 in List A of Part 2 in Annex V): Waste electrical and electronic assemblies equipment containing or scrapThis entry does not include scrap assemblies from electric power generation. contaminated with cadmium, lead, mercury, organohalogen compounds or other Annex I constituents to an extent that the waste exhibits an Annex III characteristic, or with a component containing components such as accumulators and other batteries included on list A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or contaminated with Annex I constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) to an extent that they possess the component exhibits an Annex III characteristic, including but not limited to any of the characteristics contained in following components: glass from cathode-ray tubes included on list A a battery included on list A a switch, lamp, fluorescent tube or a display device backlight which contains mercury a capacitor containing PCBs a component containing asbestos certain circuit boards certain display devices certain plastic components containing a brominated flame retardant Waste components of electrical and electronic equipment containing or contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III (note the related characteristic, unless covered by another entry on list B, B1110)PCBs are at a concentration level A Wastes arising from the processing of 50 mg/kg waste electrical and electronic equipment or more. waste components of electrical and electronic equipment, and containing or contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic (e.g. fractions arising from shredding or dismantling), unless covered by another entry on list A A1190 Waste metal cables coated or insulated with plastics containing or contaminated with coal tar, PCBPCBs are at a concentration level of 50 mg/kg or more., lead, cadmium, other organohalogen compounds or other Annex I constituents, to the extent that they … 3,393 unchanged words … of each material and in an environmentally sound manner and almost free from contamination and other types of wastesIn relation to almost free from contamination and other types of wastes, international and national specifications may offer a point of reference.. Y49 Electrical and electronic waste: Waste electrical and electronic equipment not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, and in which none of the components (e.g. certain circuit boards, certain display devices) contain or are contaminated with Annex I constituents to an extent that the component exhibits an Annex III characteristic Waste components of electrical and electronic equipment (e.g. certain circuit boards, certain display devices) not containing and not contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX Wastes arising from the processing of waste electrical and electronic equipment or waste components of electrical and electronic equipment (e.g. fractions arising from shredding or dismantling), and not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX. List B (Waste from Appendix 4, Part II of the OECD Decision)The wastes numbered AB130, AC250, AC260 and AC270 have been deleted since they have been considered, in accordance with the procedure laid down in Article 18 of Directive 2006/12/EC of the European Parliament and of the Council of 5 April 2006 on waste (OJ L 114, 27.4.2006, p. 9, as repealed by Directive 2008/98/EC), to be non-hazardous and therefore not subject to the export prohibition in Article 39 of this Regulation. The waste numbered AC300 has been deleted since the waste in question is covered by entry A3210 in List A of Part 1. Metal-bearing wastes This listing includes wastes in the form of ash, residue, slag, dross, skimming, scaling, dust, powder, sludge and cake, unless a material is expressly listed elsewhere. AA010 261900 Dross, scalings and other wastes from the manufacture of iron and steel AA060 262050 Vanadium ashes and residues AA190 810420 ex810430 Magnesium waste and scrap that is flammable, pyrophoric or emits, upon contact with water, flammable gases in dangerous quantities Wastes containing principally inorganic constituents, which may contain metals and organic materials AB030 Wastes from non-cyanide based systems which arise from surface treatment of metals AB070 Sands used in foundry operations AB120 ex281290 Inorganic halide compounds, not elsewhere specified or included ex3824 AB150 ex382490 Unrefined calcium sulphite and calcium sulphate from flue gas desulphurisation (FGD) Wastes containing principally organic constituents, which may contain metals and inorganic materials AC060 ex381900 Hydraulic fluids AC070 ex381900 Brake fluids AC080 ex382000 Antifreeze fluids AC150 Chlorofluorocarbons AC160 Halons AC170 ex440310 Treated cork and wood wastes Wastes which may contain either inorganic or organic constituents AD090 ex382490 Wastes from production, formulation and use of reprographic and photographic chemicals and materials not elsewhere specified or included AD100 Wastes from non-cyanide based systems which arise from surface treatment of plastics AD120 ex391400 Ion exchange resins ex3915 AD150 Naturally occurring organic material used as a filter medium (such as bio-filters) Wastes containing principally inorganic constituents, which may contain metals and organic materials RB020 ex6815 Ceramic based fibres of physico-chemical characteristics similar to those of asbestos