Annex V

32024R1157 → 02024R1157-20250109

ANNEX V WASTE LISTS FOR THE PURPOSE OF ARTICLE 39 Introductory notes 1. This Annex applies without prejudice to Directive 2008/98/EC. 2. This Annex consists of two parts. Article 39 further refers to the list of waste as referred to in Article 7 of … 427 unchanged words … on list B (B1160) does not specify exceptions. A1160 Waste lead-acid batteries, whole or crushed A1170 Unsorted waste batteries excluding mixtures of only list B batteries. Waste batteries not specified on list B containing Annex I constituents to an extent to render them hazardous. A1180 A1181 Electrical and electronic waste (note the related entry Y49 in List A of Part 2 in Annex V): Waste electrical and electronic assemblies equipment containing or scrapThis entry does not include scrap assemblies from electric power generation. contaminated with cadmium, lead, mercury, organohalogen compounds or other Annex I constituents to an extent that the waste exhibits an Annex III characteristic, or with a component containing components such as accumulators and other batteries included on list A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or contaminated with Annex I constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) to an extent that they possess the component exhibits an Annex III characteristic, including but not limited to any of the characteristics contained in following components: glass from cathode-ray tubes included on list A a battery included on list A a switch, lamp, fluorescent tube or a display device backlight which contains mercury a capacitor containing PCBs a component containing asbestos certain circuit boards certain display devices certain plastic components containing a brominated flame retardant Waste components of electrical and electronic equipment containing or contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III (note the related characteristic, unless covered by another entry on list B, B1110)PCBs are at a concentration level A Wastes arising from the processing of 50 mg/kg waste electrical and electronic equipment or more. waste components of electrical and electronic equipment, and containing or contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic (e.g. fractions arising from shredding or dismantling), unless covered by another entry on list A A1190 Waste metal cables coated or insulated with plastics containing or contaminated with coal tar, PCBPCBs are at a concentration level of 50 mg/kg or more., lead, cadmium, other organohalogen compounds or other Annex I constituents, to the extent that they … 3,393 unchanged words … of each material and in an environmentally sound manner and almost free from contamination and other types of wastesIn relation to almost free from contamination and other types of wastes, international and national specifications may offer a point of reference.. Y49 Electrical and electronic waste: Waste electrical and electronic equipment not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, and in which none of the components (e.g. certain circuit boards, certain display devices) contain or are contaminated with Annex I constituents to an extent that the component exhibits an Annex III characteristic Waste components of electrical and electronic equipment (e.g. certain circuit boards, certain display devices) not containing and not contaminated with Annex I constituents to an extent that the waste components exhibit an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX Wastes arising from the processing of waste electrical and electronic equipment or waste components of electrical and electronic equipment (e.g. fractions arising from shredding or dismantling), and not containing and not contaminated with Annex I constituents to an extent that the waste exhibits an Annex III characteristic, unless covered by another entry in Annex II or by an entry in Annex IX. List B (Waste from Appendix 4, Part II of the OECD Decision)The wastes numbered AB130, AC250, AC260 and AC270 have been deleted since they have been considered, in accordance with the procedure laid down in Article 18 of Directive 2006/12/EC of the European Parliament and of the Council of 5 April 2006 on waste (OJ L 114, 27.4.2006, p. 9, as repealed by Directive 2008/98/EC), to be non-hazardous and therefore not subject to the export prohibition in Article 39 of this Regulation. The waste numbered AC300 has been deleted since the waste in question is covered by entry A3210 in List A of Part 1. Metal-bearing wastes This listing includes wastes in the form of ash, residue, slag, dross, skimming, scaling, dust, powder, sludge and cake, unless a material is expressly listed elsewhere. AA010 261900 Dross, scalings and other wastes from the manufacture of iron and steel AA060 262050 Vanadium ashes and residues AA190 810420 ex810430 Magnesium waste and scrap that is flammable, pyrophoric or emits, upon contact with water, flammable gases in dangerous quantities Wastes containing principally inorganic constituents, which may contain metals and organic materials AB030 Wastes from non-cyanide based systems which arise from surface treatment of metals AB070 Sands used in foundry operations AB120 ex281290 Inorganic halide compounds, not elsewhere specified or included ex3824 AB150 ex382490 Unrefined calcium sulphite and calcium sulphate from flue gas desulphurisation (FGD) Wastes containing principally organic constituents, which may contain metals and inorganic materials AC060 ex381900 Hydraulic fluids AC070 ex381900 Brake fluids AC080 ex382000 Antifreeze fluids AC150 Chlorofluorocarbons AC160 Halons AC170 ex440310 Treated cork and wood wastes Wastes which may contain either inorganic or organic constituents AD090 ex382490 Wastes from production, formulation and use of reprographic and photographic chemicals and materials not elsewhere specified or included AD100 Wastes from non-cyanide based systems which arise from surface treatment of plastics AD120 ex391400 Ion exchange resins ex3915 AD150 Naturally occurring organic material used as a filter medium (such as bio-filters) Wastes containing principally inorganic constituents, which may contain metals and organic materials RB020 ex6815 Ceramic based fibres of physico-chemical characteristics similar to those of asbestos