Annex IV

32024R1157 → 02024R1157-20250109

ANNEX IV LIST OF WASTES SUBJECT TO THE PROCEDURE OF PRIOR WRITTEN NOTIFICATION AND CONSENT (AMBER LISTED WASTE)This list originates from the OECD Decision, Appendix 4. AS REFERRED TO IN ARTICLE 4(2)(a) Part I Wastes listed in Annexes II and VIII to the Basel ConventionAnnex VIII to the Basel Convention is listed in this Regulation in Annex V, Part 1, List A. Annex II to the Basel Convention is listed in Annex V, Part 2, List A.. For the purposes of this Regulation: (a) Any reference in Annex VIII to the Basel Convention to list B shall be understood as a reference to Annex III to this Regulation. (b) In Basel entry A1010, the term excluding such wastes specifically listed on List B (Annex IX) is a reference both to Basel entry B1020 and the note on B1020 in Annex III to this Regulation, Part I(b). (c) Basel entries A1180 and entry A2060 do shall not apply and OECD entries GC010, GC020 and entry GG040 in Annex III, Part II shall apply instead when appropriate. (d) Basel entry A4050 includes spent potlinings from aluminium smelting because they contain Y33 inorganic cyanides. If the cyanides have been destroyed, spent potlinings are assigned to Part II entry AB120 because they contain Y32, inorganic fluorine compounds excluding calcium fluoride. (e) Basel entry A3210 does not apply and entry AC300 in Part II applies instead. (f) For waste shipped within the Union, Basel entry Y48 does not apply and the following entry applies instead: EU48 Plastic waste not covered by entry AC300 in Part II or by entry EU3011 in Part I of Annex III, as well as mixtures of plastic waste not covered by point 4 of Annex IIIA. (g) For waste shipped within the Union until 31 December 2026, Basel entry Y49 shall not apply and entries GC010 and GC020 in Annex III Part II shall apply instead where appropriate. Part II: Metal-bearing wastes This listing includes wastes in the form of ash, residue, slag, dross, skimming, scaling, dust, powder, sludge and cake, unless a material is expressly listed elsewhere. AA010 261900 Dross, scalings and other wastes from the manufacture of iron and steel AA060 262050 Vanadium ashes and residues AA190 810420 ex810430 Magnesium waste and scrap that is flammable, pyrophoric or emits, upon contact with water, flammable gases in dangerous quantities Wastes containing principally inorganic constituents, which may contain metals and organic materials AB030 Wastes from non-cyanide based systems which arise from surface treatment of metals AB070 Sands used in foundry operations AB120 ex281290 ex3824 Inorganic halide compounds, not elsewhere specified or included AB130 Used blasting grit AB150 ex382490 Unrefined calcium sulphite and calcium sulphate from flue gas desulphurisation (FGD) Wastes containing principally organic constituents, which may contain metals and inorganic materials AC060 ex381900 Hydraulic fluids AC070 ex381900 Brake fluids AC080 ex382000 Antifreeze fluids AC150 Chlorofluorocarbons AC160 Halons AC170 ex440310 Treated cork and wood wastes AC250 Surface active agents (surfactants) AC260 ex3101 Liquid pig manure; faeces AC270 Sewage sludge AC300 Plastic waste, including mixtures of such wastes, containing or contaminated with Annex I constituents, to an extent that it exhibits an Annex III characteristic (note the related entry EU3011 in Part I of Annex III, and the related entry EU48 in Part I) Wastes which may contain either inorganic or organic constituents AD090 ex382490 Wastes from production, formulation and use of reprographic and photographic chemicals and materials not elsewhere specified or included AD100 Wastes from non-cyanide based systems which arise from surface treatment of plastics AD120 ex391400 ex3915 Ion exchange resins AD150 Naturally occurring organic material used as a filter medium (such as bio-filters) Wastes containing principally inorganic constituents, which may contain metals and organic materials RB020 ex6815 Ceramic based fibres of physico-chemical characteristics similar to those of asbestos