in force 2013-03-06
02006R1907-20121009 → 02006R1907-20130306
Amended by Regulation (EU) No 126/2013 32013R0126
detected 2026-08-13
1 provision touched — 1 substantive, 0 date-only, 1 disputed · every change carries an explanation that passed its citation check
Emendrix checks every change against three independent sources. Where they disagree it says so rather than picking a winner.
MODIFIED +4,163 −3,415 Annex XVII RESTRICTIONS ON THE MANUFACTURE, PLACING ON THE MARKET AND USE OF CERTAIN DANGEROUS SUBSTANCES, MIXTURES AND ARTICLES§
applies from: unchanged
Sources disagree — the text comparison and the EU's own amendment metadata found this change; the amending act's instructions do not mention it. All are shown; none is overruled.
Entry 6, paragraph 1 now covers mixtures containing asbestos fibres added intentionally, in addition to articles containing them, where the earlier text referred only to articles.
In entries 16 and 17, the derogation wording changes from a reference to ILO Convention 13 "on the use of white lead and sulphates of lead in paint" to a reference to the Convention without that phrase, and it now also extends to placing on the market for restoration and maintenance uses and requires a Member State using the derogation to inform the Commission, none of which appeared in the earlier text.
In the entries 28 to 30 conditions, the reference to the concentration specified in Directive 1999/45/EC is now qualified by the added phrase limiting it to cases where no specific concentration limit is set out in Part 3 of Annex VI to Regulation (EC) No 1272/2008, a qualification absent from the earlier text.
Cited: Annex XVII, v1 · Annex XVII, v2
text before / after
02006R1907-20121009 → 02006R1907-20130306
compared line by line: this provision is too large to compare word by word, so a marked line is a line that changed somewhere
ANNEX XVII
RESTRICTIONS ON THE MANUFACTURE, PLACING ON THE MARKET AND USE OF CERTAIN DANGEROUS SUBSTANCES, MIXTURES AND ARTICLES
For substances which have been incorporated in this Annex as a consequence of restrictions adopted in the framework of Directive 76/769/EEC (Entries 1 to 58), the restrictions shall not apply to storage, keeping, treatment, filling into containers, or transfer from one container to another of these substances for export, unless the manufacture of the substances is prohibited.
… 53 unchanged lines …
CAS No 77536-68-6
(f) Chrysotile
CAS No 12001-29-5
CAS No 132207-32-0 1. The manufacture, placing on the market and use of these fibres and of articles containing these fibres added intentionally is prohibited. CAS No 132207-32-0 1. The manufacture, placing on the market and use of these fibres and of articles and mixtures containing these fibres added intentionally is prohibited.
However, Member States may exempt the placing on the market and use of diaphragms containing chrysotile (point (f)) for existing electrolysis installations until they reach the end of their service life, or until suitable asbestos-free substitutes become available, whichever is the sooner.
By 1 June 2011 Member States making use of this exemption shall provide a report to the Commission on the availability of asbestos free substitutes for electrolysis installations and the efforts undertaken to develop such alternatives, on the protection of the health of workers in the installations, on the source and quantities of chrysotile, on the source and quantities of diaphragms containing chrysotile, and the envisaged date of the end of the exemption. The Commission shall make this information publicly available.
Following receipt of those reports, the Commission shall request the Agency to prepare a dossier in accordance with Article 69 with a view to prohibit the placing on the market and use of diaphragms containing chrysotile.
… 67 unchanged lines …
(b) Trilead-bis(carbonate)-dihydroxide 2Pb CO3-Pb(OH)2
CAS No 1319-46-6
EC No 215-290-6 Shall not be placed on the market, or used, as substances or in mixtures, where the substance or mixture is intended for use as paint.
However, Member States may, in accordance with the provisions of International Labour Organisation (ILO) Convention 13 on the use of white lead and sulphates of lead in paint, permit the use on their territory of the substance or mixture for the restoration and maintenance of works of art and historic buildings and their interiors. However, Member States may, in accordance with the provisions of International Labour Organization (ILO) Convention 13, permit the use on their territory of the substance or mixture for the restoration and maintenance of works of art and historic buildings and their interiors, as well as the placing on the market for such use. Where a Member State makes use of this derogation, it shall inform the Commission thereof.
17. Lead sulphates:
(a) PbSO4
CAS No 7446-14-2
EC No 231-198-9
(b) Pbx SO4
CAS No 15739-80-7
EC No 239-831-0 Shall not be placed on the market, or used, as substances or in mixtures, where the substance or mixture is intended for use as paint.
However, Member States may, in accordance with the provisions of ILO Convention 13 on the use of white lead and sulphates of lead in paint, permit the use on their territory of the substance or mixture for the restoration and maintenance of works of art and historic buildings and their interiors. However, Member States may, in accordance with the provisions of International Labour Organization (ILO) Convention 13, permit the use on their territory of the substance or mixture for the restoration and maintenance of works of art and historic buildings and their interiors, as well as the placing on the market for such use. Where a Member State makes use of this derogation, it shall inform the Commission thereof.
18. Mercury compounds Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is intended for use:
(a) to prevent the fouling by micro-organisms, plants or animals of:
the hulls of boats,
… 202 unchanged lines …
in mixtures,
for supply to the general public when the individual concentration in the substance or mixture is equal to or greater than:
either the relevant specific concentration limit specified in Part 3 of Annex VI to Regulation (EC) No 1272/2008, or,
the relevant concentration specified in Directive 1999/45/EC. the relevant concentration specified in Directive 1999/45/EC where no specific concentration limit is set out in Part 3 of Annex VI to Regulation (EC) No 1272/2008.
Without prejudice to the implementation of other Community provisions relating to the classification, packaging and labelling of substances and mixtures, suppliers shall ensure before the placing on the market that the packaging of such substances and mixtures is marked visibly, legibly and indelibly as follows:
Restricted to professional users.
2. By way of derogation, paragraph 1 shall not apply to:
… 79 unchanged lines …
By way of derogation this provision shall not apply to:
(a) medicinal or veterinary products as defined by Directive 2001/82/EC and Directive 2001/83/EC;
(b) cosmetic products as defined by Directive 76/768/EEC.
40. Substances classified as flammable gases category 1 or 2, flammable liquids categories 1, 2 or 3, flammable solids category 1 or 2, substances and mixtures which, in contact with water, emit flammable gases, category 1, 2 or 3, pyrophoric liquids category 1 or pyrophoric solids category 1, regardless of whether they appear in Part 3 of Annex VI to that Regulation or not. 1. Shall not be used, as substance or as mixtures in aerosol dispensers where these aerosol dispensers are intended for supply to the general public for entertainment and decorative purposes such as the following: 40. Substances classified as flammable gases category 1 or 2, flammable liquids categories 1, 2 or 3, flammable solids category 1 or 2, substances and mixtures which, in contact with water, emit flammable gases, category 1, 2 or 3, pyrophoric liquids category 1 or pyrophoric solids category 1, regardless of whether they appear in Part 3 of Annex VI to Regulation (EC) No 1272/2008 or not. 1. Shall not be used, as substance or as mixtures in aerosol dispensers where these aerosol dispensers are intended for supply to the general public for entertainment and decorative purposes such as the following:
metallic glitter intended mainly for decoration,
artificial snow and frost,
whoopee cushions,
… 62 unchanged lines …
47. Chromium VI compounds 1. Cement and cement-containing mixtures shall not be placed on the market, or used, if they contain, when hydrated, more than 2 mg/kg (0,0002 %) soluble chromium VI of the total dry weight of the cement.
2. If reducing agents are used, then without prejudice to the application of other Community provisions on the classification, packaging and labelling of substances and mixtures, suppliers shall ensure before the placing on the market that the packaging of cement or cement-containing mixtures is visibly, legibly and indelibly marked with information on the packing date, as well as on the storage conditions and the storage period appropriate to maintaining the activity of the reducing agent and to keeping the content of soluble chromium VI below the limit indicated in paragraph 1.
3. By way of derogation, paragraphs 1 and 2 shall not apply to the placing on the market for, and use in, controlled closed and totally automated processes in which cement and cement-containing mixtures are handled solely by machines and in which there is no possibility of contact with the skin.
4. The standard adopted by the European Committee for Standardization (CEN) for testing the water-soluble chromium (VI) content of cement and cement-containing mixtures shall be used as the test method for demonstrating conformity with paragraph 1.
48. Toluene
CAS No 108-88-3
EC No 203-625-9 Shall not be placed on the market, or used, as a substance or in mixtures in a concentration equal to or greater than 0,1 % by weight where the substance or mixture is used in adhesives or spray paints intended for supply to the general public.
… 83 unchanged lines …
Do not use in paint spraying equipment.
56. Methylenediphenyl diisocyanate (MDI)
CAS No 26447-40-5
EC No 247-714-0 1. Shall not be placed on the market after 27 December 2010, as a constituent of mixtures in concentrations equal to or greater than 0,1 % by weight of MDI for supply to the general public, unless suppliers shall ensure before the placing on the market that the packaging: EC No 247-714-0
including the following specific isomers:
(a) 4,4’-Methylenediphenyl diisocyanate:
CAS No 101-68-8
EC No 202-966-0;
(b) 2,4’-Methylenediphenyl diisocyanate:
CAS No 5873-54-1
EC No 227-534-9;
(c) 2,2’-Methylenediphenyl diisocyanate:
CAS No 2536-05-2
EC No 219-799-4 1. Shall not be placed on the market after 27 December 2010, as a constituent of mixtures in concentrations equal to or greater than 0,1 % by weight of MDI for supply to the general public, unless suppliers shall ensure before the placing on the market that the packaging:
(a) contains protective gloves which comply with the requirements of Council Directive 89/686/EEC;
(b) is marked visibly, legibly and indelibly as follows, and without prejudice to other Community legislation concerning the classification, packaging and labelling of substances and mixtures:
— Persons already sensitised to diisocyanates may develop allergic reactions when using this product.
… 2,136 unchanged lines …
Hydrocarbons, C1-4, debutaniser fraction; Petroleum gas 649-091-00-4 271-261-8 68527-19-5 H, K
Gases (petroleum), C1-5, wet; Petroleum gas
(A complex combination of hydrocarbons produced by the distillation of crude oil and/or the cracking of tower gas oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C1 through C5.) 649-092-00-X 271-624-0 68602-83-5 H, K
Hydrocarbons, C2-4; Petroleum gas 649-093-00-5 271-734-9 68606-25-7 H, K Hydrocarbons, C2-4; Petroleum gas 649-093-00-5 271-734-9 68606-25-7 H,K
Hydrocarbons, C3; Petroleum gas 649-094-00-0 271-735-4 68606-26-8 H, K
Gases (petroleum), alkylation feed; Petroleum gas
(A complex combination of hydrocarbons produced by the catalytic cracking of gas oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C3 through C4.) 649-095-00-6 271-737-5 68606-27-9 H, K
… 52 unchanged lines …
Gases (petroleum), blend oil, hydrogen-nitrogen-rich; Refinery gas
(A complex combination of hydrocarbons obtained by distillation of a blend oil. It consists primarily of hydrogen and nitrogen with various small amounts of carbon monoxide, carbon dioxide, and aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C5.) 649-123-00-7 270-749-8 68477-68-9 H, K
Gases (petroleum), catalytic reformed naphtha stripper overheads; Refinery gas
(A complex combination of hydrocarbons obtained from stabilisation of catalytic reformed naphtha. It consists of hydrogen and saturated hydrocarbons having carbon numbers predominantly in the range of C1 through C4.) 649-124-00-2 270-759-2 68477-77-0 H, K (A complex combination of hydrocarbons obtained from stabilisation of catalytic reformed naphtha. It consists of hydrogen and saturated hydrocarbons having carbon numbers predominantly in the range of C1 through C4.) 649-124-00-2 270-759-2 68477-77-0 H, K
Gases (petroleum), C6-8 catalytic reformer recycle; Refinery gas
(A complex combination of hydrocarbons produced by distillation of products from catalytic reforming of C6-C8 feed and recycled to conserve hydrogen. It consists primarily of hydrogen. It may also contain various small amounts of carbon monoxide, carbon dioxide, nitrogen, and hydrocarbons having carbon numbers predominantly in the range of C1 through C6.) 649-125-00-8 270-761-3 68477-80-5 H, K
Gases (petroleum), C6-8 catalytic reformer; Refinery gas
… 677 unchanged lines …
(AEEA) 603-194-00-0 203-867-5 111-41-1 1,2-Diethoxyethane 603-208-00-5 211-076-1 629-14-1 4,4'-isobutylethylidenediphenol; 2,2-bis (4'-hydroxyphenyl)-4-methylpentane 604-024-00-8 401-720-1 6807-17-6 (E)-3-[1-[4-[2-(dimethylamino)ethoxy]phenyl]-2-phenylbut-1-enyl]phenol 604-073-00-5 428-010-4 82413-20-5 N-methyl-2-pyrrolidone;
1-Methyl-2-pyrrolidone 606-021-00-7 212-828-1 872-50-4 Tetrahydrothiopyran-3-carboxaldehyde 606-062-00-0 407-330-8 61571-06-0 2-Butyryl-3-hydroxy-5-thiocyclohexan-3-yl-cyclohex-2-en-1-one 606-100-00-6 425-150-8 94723-86-1 Cyclic 3-(1,2-ethanediylacetale)-estra-5(10),9(11)-diene-3,17-dione 606-131-00-5 427-230-8 5571-36-8 2-Methoxyethyl acetate; ethylene glycol monomethyl ether acetate; methylglycol acetate 607-036-00-1 203-772-9 110-49-6 2-Ethoxyethyl acetate; ethylene glycol monoethyl ether acetate; ethylglycol acetate 607-037-00-7 203-839-2 111-15-9 2-Ethylhexyl 3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl methyl thio acetate 607-203-00-9 279-452-8 80387-97-9 Bis(2-Methoxyethyl) phthalate 607-228-00-5 204-212-6 117-82-8 2-Methoxypropyl acetate 607-251-00-0 274-724-2 70657-70-4 Fluazifop-butyl (ISO); butyl (RS)-2-[4-(5-trifluoromethyl-2-pyridyloxy)phenoxy]propionate 607-304-00-8 274-125-6 69806-50-4 Vinclozolin (ISO); N-3,5-Dichlorophenyl-5-methyl-5-vinyl-1,3-oxazolidine-2,4-dione 607-307-00-4 256-599-6 50471-44-8 Methoxyacetic acid 607-312-00-1 210-894-6 625-45-6 E
Bis(2-ethylhexyl) phthalate; di-(2-ethylhexyl) phthalate; DEHP 607-317-00-9 204-211-0 117-81-7 Dibutyl phthalate; DBP 607-318-00-4 201-557-4 84-74-2 (+/-) tetrahydrofurfuryl (R)-2-[4-(6-chloroquinoxalin-2-yloxy)phenyloxy]propionate 607-373-00-4 414-200-4 119738-06-6 E
1,2-benzenedicarboxylic acid, dipentylester, branched and linear [1]
n-pentyl-isopentylphthalate [2]
di-n-pentyl phthalate [3]
Diisopentylphthalate [4] 607-426-00-1 284-032-2 [1]-[2]
205-017-9 [3]-[4] 84777-06-0 [1]-[2]
131-18-0 [3]
42925-80-4 [4] Benzyl butyl phthalate 1,2-benzenedicarboxylic acid, dipentylester, branched and linear [1] 607-426-00-1 284-032-2 [1] 84777-06-0 [1] n-pentyl-isopentylphthalate [2] [2] [2] di-n-pentyl phthalate [3] 205-017-9 [3] 131-18-0 [3] Diisopentylphthalate [4] 210-088-4 [4] 605-50-5 [4] Benzyl butyl phthalate
BBP 607-430-00-3 201-622-7 85-68-7 1,2-Benzenedicarboxylic acid
di-C7-11-branched and linear alkylesters 607-480-00-6 271-084-6 68515-42-4 1,2-Benzenedicarboxylic acid;
Di-C6-8-branched alkylesters, C7-rich 607-483-00-2 276-158-1 71888-89-6 A mixture of: disodium 4-(3-ethoxycarbonyl-4-(5-(3-ethoxycarbonyl-5-hydroxy-1-(4-sulfonatophenyl)pyrazol-4-yl)penta-2,4-dienylidene)-4,5-dihydro-5-oxopyrazol-1-yl)benzenesulfonate;
… 106 unchanged lines …
Appendix 10
Entry 43 — Azocolourants — List of testing methods
List of testing methods
ESO: European standardisation organisations:
CEN: Avenue Marnix 17, 1000 Brussels, Belgium, tel. +32 2550 08 11, fax +32 2550 08 19 (http://www.cen.eu/cenorm/homepage.htm)
Cenelec: Avenue Marnix 17, B-1000 Brussels, tel. +32 25196871, fax +32 2519 69 19 (http://www.cenelec.eu/Cenelec/Homepage.htm)
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis; tel. (33) 492 94 42 00, fax (33) 493 65 47 16. http://www.etsi.org
European standardisation organisation Reference and title of the standard Reference document Reference of the superseded standard
CEN Leather — Chemical tests — Determination of certain azocolorants in dyed leathers CEN ISO/TS 17234:2003 NONE
CEN Textiles — Methods for the determination of certain aromatic amines derived from azocolorants — Part 1: Detection of the use of certain azo colorants accessible without extraction EN 14362-1:2003 NONE
CEN Textiles — Methods for determination of certain aromatic amines derived from azocolorants — Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres EN 14362-2:2003 NONE
Appendix 11 European standardisation organisation Reference and title of the harmonised standard Reference of the superseded standard
CEN EN ISO 17234-1:2010
Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colorants CEN ISO/TS 17234:2003
CEN EN ISO 17234-2:2011
Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 2: Determination of 4-aminoazobenzene CEN ISO/TS 17234:2003
CEN EN 14362-1:2012
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres EN 14362-1:2003
EN 14362-2:2003
CEN EN 14362-3:2012
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene Appendix 11
Entries 28 to 30 — Derogations for specific substances
OJ L 104, 8.4.2004, p. 1.
Substances Derogations
1. (a) Sodium perborate; perboric acid, sodium salt; perboric acid, sodium salt, monohydrate; sodium peroxometaborate; perboric acid (HBO(O2)), sodium salt, monohydrate; sodium peroxoborate
CAS No 15120-21-5; 11138-47-9; 12040-72-1; 7632-04-4; 10332-33-9
EC No 239-172-9; 234-390-0; 231-556-4
(b) Perboric acid (H3BO2(O2)), monosodium salt trihydrate; perboric acid, sodium salt, tetrahydrate; perboric acid (HBO(O2)), sodium salt, tetrahydrate; sodium peroxoborate hexahydrate
CAS No 13517-20-9; 37244-98-7; 10486-00-7
EC No 239-172-9; 234-390-0; 231-556-4 Detergents as defined by Regulation (EC) No 648/2004 of the European Parliament and of the Council. The derogation shall apply until 1 June 2013.
The full entry, with the citation mapping v1 = 02006R1907-20121009, v2 = 02006R1907-20130306, is committed at eu/32006R1907/CHANGELOG.md.