emendrix

Registration, Evaluation, Authorisation and Restriction of Chemicals

REACH · 32006R1907 · every event for this act · on EUR-Lex

Everything Regulation (EU) No 836/2012 amended

in force 2012-10-09

02006R1907-20120605 → 02006R1907-20121009

Amended by Regulation (EU) No 836/2012 32012R0836

detected 2026-08-13

1 provision touched — 1 substantive, 0 date-only, 1 disputed · every change carries an explanation that passed its citation check

Emendrix checks every change against three independent sources. Where they disagree it says so rather than picking a winner.

MODIFIED +3,160 −1,053 Annex XVII RESTRICTIONS ON THE MANUFACTURE, PLACING ON THE MARKET AND USE OF CERTAIN DANGEROUS SUBSTANCES, MIXTURES AND ARTICLES

applies from: unknown (the text changed beyond its dates, so no date that moved can be read as the application date)

dates added to the text: 1961-12-10, 2012-11-19, 2013-10-09, 2017-10-09

Sources disagree — the text comparison and the EU's own amendment metadata found this change; the amending act's instructions do not mention it. All are shown; none is overruled.

The list of Official Journal reference citations at the top of the Annex gains an additional entry, OJ L 326, 29.12.1969, p. 36, which was not present before.

In entry 23, paragraph 1, the wording introducing the list of polymer types is tightened from a general phrase to one that explicitly points to the list that follows, and the list itself is shortened, with high-density polyethylene (HDPE), acrylonitrile butadiene styrene (ABS) and poly(methyl methacrylate) (PMMA) removed from the polymers named.

Entry 23, paragraph 1 also gains a new final subparagraph directing the Commission, by 19 November 2012 and in accordance with Article 69, to ask the European Chemicals Agency to prepare a dossier under Annex XV assessing whether cadmium use in plastic materials other than those listed should be restricted; the remainder of the text beyond this point is cut off in what was shown.

Cited: Annex XVII, v2 · Annex XVII, v1

text before / after

02006R1907-2012060502006R1907-20121009

compared line by line: this provision is too large to compare word by word, so a marked line is a line that changed somewhere

ANNEX XVII RESTRICTIONS ON THE MANUFACTURE, PLACING ON THE MARKET AND USE OF CERTAIN DANGEROUS SUBSTANCES, MIXTURES AND ARTICLES For substances which have been incorporated in this Annex as a consequence of restrictions adopted in the framework of Directive 76/769/EEC (Entries 1 to 58), the restrictions shall not apply to storage, keeping, treatment, filling into containers, or transfer from one container to another of these substances for export, unless the manufacture of the substances is prohibited. OJ L 256, 7.9.1987, p. 42.OJ L 147, 9.6.1975, p. 40.OJ L 37, 13.2.2003, p. 19.OJ L 263, 9.10.2007, p. 1.OJ L 171, 9.7.2003, p. 1.OJ L 124, 9.5.2002, p. 1.OJ L 24, 29.1.2008, p. 8.OJ L 104, 8.4.2004, p. 1.OJ L 399, 30.12.1989, p. 18.OJ L 304, 21.11.2003, p. 1.OJ L 121, 15.5.1993, p. 20.OJ L 270, 21.10.2003, p. 1.OJ L 365, 31.12.1994, p. 10. OJ L 256, 7.9.1987, p. 42.OJ L 147, 9.6.1975, p. 40.OJ L 37, 13.2.2003, p. 19.OJ L 263, 9.10.2007, p. 1.OJ L 171, 9.7.2003, p. 1.OJ L 124, 9.5.2002, p. 1.OJ L 24, 29.1.2008, p. 8.OJ L 104, 8.4.2004, p. 1.OJ L 399, 30.12.1989, p. 18.OJ L 304, 21.11.2003, p. 1.OJ L 121, 15.5.1993, p. 20.OJ L 270, 21.10.2003, p. 1.OJ L 365, 31.12.1994, p. 10.OJ L 326, 29.12.1969, p. 36. Column 1 Designation of the substance, of the group of substances or of the mixture Column 2 Conditions of restriction … 225 unchanged lines … 23. Cadmium CAS No 7440-43-9 EC No 231-152-8 and its compounds For the purpose of this entry, the codes and chapters indicated in square brackets are the codes and chapters of the tariff and statistical nomenclature of Common Customs Tariff as established by Council Regulation (EEC) No 2658/87. 1. Shall not be used in mixtures and articles produced from synthetic organic polymers (hereafter referred to as plastic material) such as: 1. Shall not be used in mixtures and articles produced from the following synthetic organic polymers (hereafter referred to as plastic material): polymers or copolymers of vinyl chloride (PVC) [3904 10] [3904 21] polyurethane (PUR) [3909 50] low-density polyethylene (LDPE), with the exception of low-density polyethylene used for the production of coloured masterbatch [3901 10] cellulose acetate (CA) [3912 11] cellulose acetate butyrate (CAB) [3912 11] epoxy resins [3907 30] melamine-formaldehyde (MF) resins [3909 20] urea-formaldehyde (UF) resins [3909 10] unsaturated polyesters (UP) [3907 91] polyethylene terephthalate (PET) [3907 60] polybutylene terephthalate (PBT) transparent/general-purpose polystyrene [3903 11] acrylonitrile methylmethacrylate (AMMA) cross-linked polyethylene (VPE) high-impact polystyrene polypropylene (PP) [3902 10] high-density polyethylene (HDPE) [3901 20] acrylonitrile butadiene styrene (ABS) [3903 30] poly(methyl methacrylate) (PMMA) [3906 10]. Mixtures and articles produced from plastic material shall not be placed on the market if the concentration of cadmium (expressed as Cd metal) is equal to or greater than 0,01 % by weight of the plastic material. Mixtures and articles produced from plastic material as listed above shall not be placed on the market if the concentration of cadmium (expressed as Cd metal) is equal to or greater than 0,01 % by weight of the plastic material. By way of derogation, the second subparagraph shall not apply to articles placed on the market before 10 December 2011. The first and second subparagraphs apply without prejudice to Council Directive 94/62/EC and acts adopted on its basis. By 19 November 2012, in accordance with Article 69, the Commission shall ask the European Chemicals Agency to prepare a dossier conforming to the requirements of Annex XV in order to assess whether the use of cadmium and its compounds in plastic material, other than that listed in subparagraph 1, should be restricted. 2. Shall not be used in paints [3208] [3209]. For paints with a zinc content exceeding 10 % by weight of the paint, the concentration of cadmium (expressed as Cd metal) shall not be equal to or greater than 0,1 % by weight. Painted articles shall not be placed on the market if the concentration of cadmium (expressed as Cd metal) is equal to or greater than 0,1 % by weight of the paint on the painted article. … 388 unchanged lines … CAS No 79-06-1 Shall not be placed on the market or used as a substance or constituent of mixtures in a concentration, equal to or greater than 0,1 % by weight for grouting applications after 5 November 2012. 61. Dimethylfumarate (DMF) CAS No 624-49-7 EC 210-849-0 Shall not be used in articles or any parts thereof in concentrations greater than 0,1 mg/kg. Articles or any parts thereof containing DMF in concentrations greater than 0,1 mg/kg shall not be placed on the market. EC 210-849-0 Shall not be used in articles or any parts thereof in concentrations greater than 0,1 mg/kg. Articles or any parts thereof containing DMF in concentrations greater than 0,1 mg/kg shall not be placed on the market. 63. Lead CAS No 7439-92-1 EC No 231-100-4 and its compounds 1. Shall not be placed on the market or used in any individual part of jewellery articles if the concentration of lead (expressed as metal) in such a part is equal to or greater than 0,05 % by weight. 2. For the purposes of paragraph 1: (i) jewellery articles shall include jewellery and imitation jewellery articles and hair accessories, including: (a) bracelets, necklaces and rings; (b) piercing jewellery; (c) wrist watches and wrist-wear; (d) brooches and cufflinks; (ii) any individual part shall include the materials from which the jewellery is made, as well as the individual components of the jewellery articles. 3. Paragraph 1 shall also apply to individual parts when placed on the market or used for jewellery-making. 4. By way of derogation, paragraph 1 shall not apply to: (a) crystal glass as defined in Annex I (categories 1, 2, 3 and 4) to Council Directive 69/493/EEC; (b) internal components of watch timepieces inaccessible to consumers; (c) non-synthetic or reconstructed precious and semiprecious stones (CN code 7103, as established by Regulation (EEC) No 2658/87), unless they have been treated with lead or its compounds or mixtures containing these substances; (d) enamels, defined as vitrifiable mixtures resulting from the fusion, vitrification or sintering of minerals melted at a temperature of at least 500 °C. 5. By way of derogation, paragraph 1 shall not apply to jewellery articles placed on the market for the first time before 9 October 2013 and jewellery articles produced before 10 December 1961. 6. By 9 October 2017, the Commission shall re-evaluate this entry in the light of new scientific information, including the availability of alternatives and the migration of lead from the articles referred to in paragraph 1 and, if appropriate, modify this entry accordingly. Appendices 1 to 6 FOREWORD Explanations of column headings … 2,940 unchanged lines … (b) Perboric acid (H3BO2(O2)), monosodium salt trihydrate; perboric acid, sodium salt, tetrahydrate; perboric acid (HBO(O2)), sodium salt, tetrahydrate; sodium peroxoborate hexahydrate CAS No 13517-20-9; 37244-98-7; 10486-00-7 EC No 239-172-9; 234-390-0; 231-556-4 Detergents as defined by Regulation (EC) No 648/2004 of the European Parliament and of the Council. The derogation shall apply until 1 June 2013.

The full entry, with the citation mapping v1 = 02006R1907-20120605, v2 = 02006R1907-20121009, is committed at eu/32006R1907/CHANGELOG.md.