in force 2026-05-29 INSERTED+1,243 −0§
Amended by Regulation (EU) 2024/2748 32024R2748
applies from: unknown (an inserted provision states its own application date only in prose)
Sources disagree — the text comparison and the amending act's instructions found this change; the EU's own amendment metadata does not list it. All are shown; none is overruled.
A new Article 25a has been added, setting out conditions under which Articles 25b to 25e apply, namely that the Commission has adopted an implementing act under Article 28 of Regulation (EU) 2024/2747 for the relevant machinery and related products, that those products have been designated as crisis-relevant goods under Article 18(4) of that Regulation, and that an internal market emergency mode activated under Article 18 of that Regulation is in effect.
The new article also states that Article 25c(7) continues to apply during the emergency mode and after its expiry or deactivation, and that the Commission may adopt implementing acts on corrective or restrictive actions, procedures, and labelling and traceability requirements for machinery and related products under Articles 25c and 25d, following the examination procedure in Article 48(3).
Cited: Art. 25a, v2
text before / after
inserted text (02023R1230-20260529)
Article 25a Application of emergency procedures 1. Articles 25b to 25e of this Regulation shall apply only if the Commission has adopted an implementing act pursuant to Article 28 of Regulation (EU) 2024/2747 with respect to machinery and related products covered by this Regulation. 2. Articles 25b to 25e of this Regulation shall apply only to machinery and related products which have been designated as crisis-relevant goods pursuant to Article 18(4) of Regulation (EU) 2024/2747. 3. Articles 25b to 25e of this Regulation shall apply only during the internal market emergency mode that has been activated in accordance with Article 18 of Regulation (EU) 2024/2747. However, Article 25c(7) of this Regulation shall apply during the internal market emergency mode and after its expiry or deactivation. 4. The Commission may adopt implementing acts regarding the corrective or restrictive actions to be taken, the procedures to be followed and the specific labelling and traceability requirements with respect to machinery and related products placed on the market or put into service in accordance with Articles 25c and 25d. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 48(3).