in force 2026-05-29 INSERTED+1,246 −0§
Amended by Regulation (EU) 2024/2748 32024R2748
applies from: unknown (an inserted provision states its own application date only in prose)
Sources disagree — the text comparison and the amending act's instructions found this change; the EU's own amendment metadata does not list it. All are shown; none is overruled.
A new Article 40a has been added, setting out conditions under which Articles 40b to 40e apply: an implementing act adopted under Article 28 of Regulation (EU) 2024/2747 covering the relevant appliances and fittings, a designation of those goods as crisis-relevant under Article 18(4) of that Regulation, and an activated internal market emergency mode under Article 18 of that Regulation, with Article 40c(7) stated to continue applying during that emergency mode and after its expiry or deactivation.
The new article also gives the Commission power to adopt implementing acts on corrective or restrictive actions, procedures, and specific labelling and traceability requirements for appliances and fittings placed on the market or used for the manufacturer's own purposes under Articles 40c and 40d, to be adopted under the examination procedure referred to in Article 42(3).
Cited: Art. 40a, v2
text before / after
inserted text (02016R0426-20260529)
Article 40a Application of emergency procedures 1. Articles 40b to 40e of this Regulation shall apply only if the Commission has adopted an implementing act pursuant to Article 28 of Regulation (EU) 2024/2747 with respect to appliances and fittings covered by this Regulation. 2. Articles 40b to 40e of this Regulation shall apply only to appliances and fittings which have been designated as crisis-relevant goods pursuant to Article 18(4) of Regulation (EU) 2024/2747. 3. Articles 40b to 40e of this Regulation shall apply only during the internal market emergency mode that has been activated in accordance with Article 18 of Regulation (EU) 2024/2747. However, Article 40c(7) of this Regulation shall apply during the internal market emergency mode and after its expiry or deactivation. 4. The Commission may adopt implementing acts regarding the corrective or restrictive actions to be taken, the procedures to be followed and the specific labelling and traceability requirements with respect to appliances and fittings placed on the market or used for the manufacturer’s own purposes in accordance with Articles 40c and 40d. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 42(3).